Mintie | Global Provider of Indoor Environmental Solutions

Global Provider of Indoor Environmental Solutions

ECU-CC

ECU-CC Disposable Envelopes

Part #: ECU-CC-5DE
The Disposable Envelope provides reliability and high performance in an affordable, disposable solution for containment standardization. These fire retardant envelopes provide constant appearance, cleanliness and safety. Includes 5 disposable envelopes. This product will ship on July 27th.

Leg Assembly, Right

Part #: MECULARWH
Right Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg. 61"

Leg Assembly w/ Wheel, Right

Part #: MECULAWRWH
Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring InsertAssembly, with Right Inner Leg with Wheel. 61"

Leg Assembly w/ Wheel, Left

Part #: MECULAWLWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring InsertAssembly, with Left Inner Leg w/ Wheel. 61"

Leg Assembly, Left

Part #: MECULALWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg. 61"

Lower Truss Assembly, Long Side ECU

Part #: MECULTALSWH
Includes both lower trusses, long side of ECU, with Over Center Bracket. 53.5" long

Lower Truss Assembly, Short Side ECU

Part #: MECULTASSWH
Includes both lower trusses, short side of ECU, with Over Center Bracket. 29".

Upper Truss Assembly, Long Side ECU

Part #: MECUUTALSWH
Double pair of crossed trusses, long side of ECU including 4 spacers. Two pieces of 29" each.

Upper Truss Assembly, Short Side ECU

Part #: MECUUTASSWH
Single pair of crossed trusses, short side of ECU, including 4 spacers. 29" Long.

Plastic slider piece with pull ring

Part #: MECUUTSPWH
Plastic Slider piece for ECU-CC with pull ring

Plastic slider piece

Part #: MECUUTSPWH
Plastic Slider piece for ECU-CC with button hole

ECU Foam Kit

Part #: MECUUTFKWH
Foam pieces for upper folding frame

Plastic Top Cap

Part #: MECUUTTCWH
Plastic top cap with hole

Upper Folding Frame (UFF), Boxed

Part #: MECUUFFWH
Upper folding frame for ECU-CC for spring loaded top. With metal locking pieces.57" x 30.5"

ECU Ceiling Cavity Disposable Envelope

Leg Assembly, Right

Part #: MECULARWH
Right Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg. 61"

Leg Assembly w/ Wheel, Right

Part #: MECULAWRWH
Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring InsertAssembly, with Right Inner Leg with Wheel. 61"

Leg Assembly w/ Wheel, Left

Part #: MECULAWLWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring InsertAssembly, with Left Inner Leg w/ Wheel. 61"

Leg Assembly, Left

Part #: MECULALWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg. 61"

Lower Truss Assembly, Long Side ECU

Part #: MECULTALSWH
Includes both lower trusses, long side of ECU, with Over Center Bracket. 53.5" long

Lower Truss Assembly, Short Side ECU

Part #: MECULTASSWH
Includes both lower trusses, short side of ECU, with Over Center Bracket. 29".

Upper Truss Assembly, Long Side ECU

Part #: MECUUTALSWH
Double pair of crossed trusses, long side of ECU including 4 spacers. Two pieces of 29" each.

Upper Truss Assembly, Short Side ECU

Part #: MECUUTASSWH
Single pair of crossed trusses, short side of ECU, including 4 spacers. 29" Long.

Plastic slider piece with pull ring

Part #: MECUUTSPWH
Plastic Slider piece for ECU-CC with pull ring

Plastic slider piece

Part #: MECUUTSPWH
Plastic Slider piece for ECU-CC with button hole

ECU Foam Kit

Part #: MECUUTFKWH
Foam pieces for upper folding frame

Plastic Top Cap

Part #: MECUUTTCWH
Plastic top cap with hole

Upper Folding Frame (UFF), Boxed

Part #: MECUUFFWH
Upper folding frame for ECU-CC for spring loaded top. With metal locking pieces.57" x 30.5"

ECU2

ECU2 Disposable Envelope 4 Pack

Part #: DE4-ECU2
The Disposable Envelope for ECU2 ceiling cavity applications provides reliability and high performance in an affordable, disposable solution for containment standardization. These fire retardant envelopes provide constant appearance, cleanliness and safety. Construction and maintenance containment has never been easier to use or easier to implement.

Leg Assembly w/ Wheel, Right

Part #: MECU2LAWRWH
Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg with Wheel

Leg Assembly, Right

Part #: MECU2LARWH
Right Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg

Leg Assembly w/ Wheel, Left

Part #: MECU2LAWLWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg w/ Wheel

Leg Assembly, Left

Part #: MECU2LALWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg

Lower Truss Assembly, Long Side ECU

Part #: MECU2LTALSWH
Includes both lower trusses, long side of ECU, with Over Center Bracket)

Lower Truss Assembly, Short Side ECU

Part #: MECU2LTASSWH
Includes both lower trusses, short side of ECU, with Over Center Bracket

Upper Truss Assembly, Long Side ECU

Part #: MECU2UTALSWH
Double pair of crossed trusses, long side of ECU including 4 spacers

Upper Truss Assembly, Short Side ECU

Part #: MECU2UTASSWH
Single pair of crossed trusses, short side of ECU, including 4 spacers

Plastic slider piece

Part #: MECU2UTSPWH
Plastic slider piece with pull ring

ECU2 Foam Kit

Part #: MECU2UTFKWH
Foam pieces for upper folding frame

Plastic Top Cap

Part #: MECU2UTTCWH
Plastic top cap with solid top

Upper Folding Frame (UFF), Boxed

Part #: MECU2UFFWH
Upper folding pieces for ECU2 with red tabs. 60" x 31.5"

ECU-AR

Leg Assembly w/ Wheel, Right

Part #: MECULAWRWH
Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg with Wheel

Leg Assembly, Right

Part #: MECULARWH
Right Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Right Inner Leg

Leg Assembly w/ Wheel, Left

Part #: MECULAWLWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg w/ Wheel

Leg Assembly, Left

Part #: MECULALWH
Left Outer Leg w/ one-piece Pull-Pin, complete with Outer Leg Cap and Spring Insert Assembly, with Left Inner Leg

Lower Truss Assembly, Long Side ECU

Part #: MECULTALSWH
Includes both lower trusses, long side of ECU, with Over Center Bracket

Lower Truss Assembly, Short Side ECU

Part #: MECULTASSWH
Includes both lower trusses, short side of ECU, with Over Center Bracket

Upper Truss Assembly, Long Side ECU

Part #: MECUUTALSWH
Double pair of crossed trusses, long side of ECU including 4 spacers

Upper Truss Assembly, Short Side ECU

Part #: MECUUTASSWH
Single pair of crossed trusses, short side of ECU, including 4 spacers

Plastic slider piece

Part #: MECUUTSPWH
Plastic Slider piece for ECU-CC with button hole

ECU Foam Kit

Part #: MECUUTFKWH
Foam pieces for upper folding frame

Plastic Top Cap

Part #: MECUUTTCWH
Plastic top cap with hole

Upper Folding Frame (UFF), Boxed

Part #: MECUUFFWH
Upper folding frame for ECU-CC for spring loaded top. With metal locking pieces.57" x 30.5"

MiniForce2

HEPA Filter for MiniForce2

Part #: AAF-HF12
HEPA Certified filter, 99/99$ @ 0.3 microns. Metal frame 12" x 12" x 12"

Pre-filters for MiniForce2

Part #: AAF-AM12
Primary/Secondary Filter, two-stage poly, 13" x 13" x 2" QTY 20

600V

HEPA Filter for 600V

Part #: AAF-HF12
HEPA Certified filter, 99/99$ @ 0.3 microns. Metal frame 12" x 12" x 12"

Pre-filters for 600V

Part #: AAF-AM12
Primary/Secondary Filter, two-stage poly, 13" x 13" x 2" QTY 20

1000V

HEPA Filter for 1000V

Part #: AAF-HF16
HEPA Certified Filter, 99.99% 0.3 Microns, metal frame. 16" x 16" x 12"

Pre-filters for 1000V

Part #: AAF-AM16
Primary/Secondary Filter, two-stage poly, 18" x 18" x 2" QTY 20

2000V

HEPA Filter for 2000V

Part #: AAF-HF24
HEPA Certified filter, 99/99$ @ 0.3 microns. Metal frame 24" x 18" x 12"

Pre-filters for 2000V

Part #: AAF-AM24
Primary/Secondary Filter, two-stage poly, 25" x 20" x 2" QTY 20

Containment of construction and maintenance has never been easier. From abatement work to ensuring facility and contractor standardization of use, the affordable disposable envelopes are an efficient, scalable solution.

The frame makes the difference. Mintie Environmental Containment Units (ECU) are industry leading because of the ease of use and performance benefits our innovative, patented frame provides. Learn more about why products with the Mintie frame last longer, and get used more often.

Learn how our core competencies guide our research and development process and how it leads to superior design and product performance.

The Infection Control Risk Assessment (ICRA) is an important part of reducing HAI and compliance is mandated by the CDC, Joint Commission and many other groups. Learn about ICRA programs and the assessment.